KSM-0PH1730
Silver
ISO, RoHS, CE
BNE
Bag
12*12 tact switch
China
85365000
GENERAL
1) Scope: This specification covers the requirements for single key switches which have no keytop(TACT SWITCHES:MECHANICAL CONTACT).
2) Operating Temperature Range: -15 to 60°C (normal humidity, normal press.)
3) Storage Temperature Range: -25 to 70°C (normal humidity, normal press.)
4) Test Conditions
Tests and measurements shall be made in the following standard conditions unless otherwise specified:
Normal temperature (temperature 16°C)
Normal humidity (relative humidity 63 to 74%)
Normal pressure (pressure 102KPa)
APPEARANCE, STYLE, AND DIMENSIONS
1) Appearance: Functionally free from rust,crack and bad plating
2) Style and Dimensions: Reference per attached outline drawing
3) Type of actuation: Tactile feedback
4)Contact Arrangement: SPST
5) Maximum Ratings: DC 12V 50mA
TACTING SWITCH SPECIFICATION
SPECIFICATIONS | |
Circuit | ON-OFF SPDT DPDT |
Rating | 5A 125/250VAC; 5A/30VDC 0.4VA/28VAC |
Dielectric Voltage | 1000VAC for 1 minute |
Contact Resistance | 100m Max.(initial) |
Insulation Resistance | 100m Min. |
Operating Force | 200+-100gf |
Total Travel | 2.2+-0.5mm |
Operating Force | 20,000,000 Cycles Min |
Soldear Specifications | 260ºC for 5 Seconds |
Operating Temperature | -20ºC to +70ºC |
GENERAL
1) Scope: This specification covers the requirements for single key switches which have no keytop(TACT SWITCHES:MECHANICAL CONTACT).
2) Operating Temperature Range: -15 to 60°C (normal humidity, normal press.)
3) Storage Temperature Range: -25 to 70°C (normal humidity, normal press.)
4) Test Conditions
Tests and measurements shall be made in the following standard conditions unless otherwise specified:
Normal temperature (temperature 16°C)
Normal humidity (relative humidity 63 to 74%)
Normal pressure (pressure 102KPa)
APPEARANCE, STYLE, AND DIMENSIONS
1) Appearance: Functionally free from rust,crack and bad plating
2) Style and Dimensions: Reference per attached outline drawing
3) Type of actuation: Tactile feedback
4)Contact Arrangement: SPST
5) Maximum Ratings: DC 12V 50mA
TACTING SWITCH SPECIFICATION
SPECIFICATIONS | |
Circuit | ON-OFF SPDT DPDT |
Rating | 5A 125/250VAC; 5A/30VDC 0.4VA/28VAC |
Dielectric Voltage | 1000VAC for 1 minute |
Contact Resistance | 100m Max.(initial) |
Insulation Resistance | 100m Min. |
Operating Force | 200+-100gf |
Total Travel | 2.2+-0.5mm |
Operating Force | 20,000,000 Cycles Min |
Soldear Specifications | 260ºC for 5 Seconds |
Operating Temperature | -20ºC to +70ºC |