dip switch
1. MECHANICAL
1\Operation Force: 8N Max
2\Operation Temp: -25~+70
3\Storage Temp: -40~+85
4\Stroke: 2.0mm
2. ELECTRICAL
1\Switching rating: 25mA, 24VDC
2\Non-Switching Rating: 100mA, 50VDC
3\Contact resistance: (a) 250mΩ max. At initial 300 mΩ. After life test
4\Insulation Resistance: 100MΩ Min, AT 500VDC
5\Capacitance: 5pF max
6\Dielectric Strength: 500VAC/1 minute
7\Circuit: Single pole double throw
8\Electrical Life: 2000 operations cycles per switch 24 VDC, 25mA
3. SOLDERING AND CLEANING PROCESSES
1\Keep all switch contacts in their "OFF" position for all operations
2\WAVW SOLDERING: Recommended Solder Temperature at 500° F (260) max. 3 seconds
3\HAND SOLDERING: Use a soldering iron of 30 watts, controlled at 608° F (320)approximately 2 seconds while applying solder
4\ When vapor methods are used do not subject the switch to solvents at temperature above 125° F (51)